Qt:Документация 4.3.2/qimage

Материал из Wiki.crossplatform.ru

Перейти к: навигация, поиск
40px Внимание: Актуальная версия перевода документации находится здесь

__NOTOC__

Image:qt-logo.png

Главная · Все классы · Основные классы · Классы по группам · Модули · Функции

Image:trolltech-logo.png

Содержание

[править] QImage Class Reference
[модуль QtGui ]

The QImage class provides a hardware-independent image representation that allows direct access to the pixel data, and can be used as a paint device. More...

 #include <QImage>

Inherits QPaintDevice.

[править] Открытые типы

  • enum Format { Format_Invalid, Format_Mono, Format_MonoLSB, Format_Indexed8, ..., Format_RGB16 }
  • enum InvertMode { InvertRgb, InvertRgba }

[править] Открытые функции

  • QImage ()
  • QImage ( const QSize & size, Format format )
  • QImage ( int width, int height, Format format )
  • QImage ( uchar * data, int width, int height, Format format )
  • QImage ( const uchar * data, int width, int height, Format format )
  • QImage ( uchar * data, int width, int height, int bytesPerLine, Format format )
  • QImage ( const uchar * data, int width, int height, int bytesPerLine, Format format )
  • QImage ( const char * const[] xpm )
  • QImage ( const QString & fileName, const char * format = 0 )
  • QImage ( const char * fileName, const char * format = 0 )
  • QImage ( const QImage & image )
  • ~QImage ()
  • bool allGray () const
  • QImage alphaChannel () const
  • uchar * bits ()
  • const uchar * bits () const
  • int bytesPerLine () const
  • qint64 cacheKey () const
  • QRgb color ( int i ) const
  • QVector<QRgb> colorTable () const
  • QImage convertToFormat ( Format format, Qt::ImageConversionFlags flags = Qt::AutoColor ) const
  • QImage convertToFormat ( Format format, const QVector<QRgb> & colorTable, Qt::ImageConversionFlags flags = Qt::AutoColor ) const
  • QImage copy ( const QRect & rectangle = QRect() ) const
  • QImage copy ( int x, int y, int width, int height ) const
  • QImage createAlphaMask ( Qt::ImageConversionFlags flags = Qt::AutoColor ) const
  • QImage createHeuristicMask ( bool clipTight = true ) const
  • QImage createMaskFromColor ( QRgb color, Qt::MaskMode mode = Qt::MaskInColor ) const
  • int depth () const
  • int dotsPerMeterX () const
  • int dotsPerMeterY () const
  • void fill ( uint pixelValue )
  • Format format () const
  • bool hasAlphaChannel () const
  • int height () const
  • void invertPixels ( InvertMode mode = InvertRgb )
  • bool isGrayscale () const
  • bool isNull () const
  • bool load ( const QString & fileName, const char * format = 0 )
  • bool load ( QIODevice * device, const char * format )
  • bool loadFromData ( const uchar * data, int len, const char * format = 0 )
  • bool loadFromData ( const QByteArray & data, const char * format = 0 )
  • QImage mirrored ( bool horizontal = false, bool vertical = true ) const
  • int numBytes () const
  • int numColors () const
  • QPoint offset () const
  • QRgb pixel ( const QPoint & position ) const
  • QRgb pixel ( int x, int y ) const
  • int pixelIndex ( const QPoint & position ) const
  • int pixelIndex ( int x, int y ) const
  • QRect rect () const
  • QImage rgbSwapped () const
  • bool save ( const QString & fileName, const char * format = 0, int quality = -1 ) const
  • bool save ( QIODevice * device, const char * format = 0, int quality = -1 ) const
  • QImage scaled ( const QSize & size, Qt::AspectRatioMode aspectRatioMode = Qt::IgnoreAspectRatio, Qt::TransformationMode transformMode = Qt::FastTransformation ) const
  • QImage scaled ( int width, int height, Qt::AspectRatioMode aspectRatioMode = Qt::IgnoreAspectRatio, Qt::TransformationMode transformMode = Qt::FastTransformation ) const
  • QImage scaledToHeight ( int height, Qt::TransformationMode mode = Qt::FastTransformation ) const
  • QImage scaledToWidth ( int width, Qt::TransformationMode mode = Qt::FastTransformation ) const
  • uchar * scanLine ( int i )
  • const uchar * scanLine ( int i ) const
  • void setAlphaChannel ( const QImage & alphaChannel )
  • void setColor ( int index, QRgb colorValue )
  • void setColorTable ( const QVector<QRgb> colors )
  • void setDotsPerMeterX ( int x )
  • void setDotsPerMeterY ( int y )
  • void setNumColors ( int numColors )
  • void setOffset ( const QPoint & offset )
  • void setPixel ( const QPoint & position, uint index_or_rgb )
  • void setPixel ( int x, int y, uint index_or_rgb )
  • void setText ( const QString & key, const QString & text )
  • QSize size () const
  • QString text ( const QString & key = QString() ) const
  • QStringList textKeys () const
  • QImage transformed ( const QMatrix & matrix, Qt::TransformationMode mode = Qt::FastTransformation ) const
  • QImage transformed ( const QTransform & matrix, Qt::TransformationMode mode = Qt::FastTransformation ) const
  • bool valid ( const QPoint & pos ) const
  • bool valid ( int x, int y ) const
  • int width () const
  • operator QVariant () const
  • bool operator!= ( const QImage & image ) const
  • QImage & operator= ( const QImage & image )
  • bool operator== ( const QImage & image ) const
  • 12 открытых функций унаследованных от QPaintDevice

[править] Статические открытые члены

  • QImage fromData ( const uchar * data, int size, const char * format = 0 )
  • QImage fromData ( const QByteArray & data, const char * format = 0 )
  • QMatrix trueMatrix ( const QMatrix & matrix, int width, int height )
  • QTransform trueMatrix ( const QTransform & matrix, int width, int height )

[править] Связанные не-члены

  • QDataStream & operator<< ( QDataStream & stream, const QImage & image )
  • QDataStream & operator>> ( QDataStream & stream, QImage & image )

[править] Дополнительные унаследованные члены

  • 1 защищенная функция унаследованна от QPaintDevice

[править] Подробное описание

The QImage class provides a hardware-independent image representation that allows direct access to the pixel data, and can be used as a paint device.

Qt provides four classes for handling image data: QImage, QPixmap, QBitmap and QPicture. QImage is designed and optimized for I/O, and for direct pixel access and manipulation, while QPixmap is designed and optimized for showing images on screen. QBitmap is only a convenience class that inherits QPixmap, ensuring a depth of 1. Finally, the QPicture class is a paint device that records and replays QPainter commands.

Because QImage is a QPaintDevice subclass, QPainter can be used to draw directly onto images. When using QPainter on a QImage, the painting can be performed in another thread than the current GUI thread, that is except rendering text (because QFont is GUI dependent). To render text in another thread, the text must first be derived as a QPainterPath in the GUI thread.

The QImage class supports several image formats described by the Format enum. These include monochrome, 8-bit, 32-bit and alpha-blended images which are available in all versions of Qt 4.x. In addition, QImage supports several formats that are specific to Qtopia Core.

QImage provides a collection of functions that can be used to obtain a variety of information about the image. There are also several functions that enables transformation of the image.

QImage objects can be passed around by value since the QImage class uses implicit data sharing. QImage objects can also be streamed and compared.

[править] Reading and Writing Image Files

QImage provides several ways of loading an image file: The file can be loaded when constructing the QImage object, or by using the load() or loadFromData() functions later on. QImage also provides the static fromData() function, constructing a QImage from the given data. When loading an image, the file name can either refer to an actual file on disk or to one of the application's embedded resources. See The Qt Resource System overview for details on how to embed images and other resource files in the application's executable.

Simply call the save() function to save a QImage object.

The complete list of supported file formats are available through the QImageReader::supportedImageFormats() and QImageWriter::supportedImageFormats() functions. New file formats can be added as plugins. By default, Qt supports the following formats:


Format Description Qt's support
BMP Windows Bitmap Read/write
GIF Graphic Interchange Format (optional) Read
JPG Joint Photographic Experts Group Read/write
JPEG Joint Photographic Experts Group Read/write
PNG Portable Network Graphics Read/write
PBM Portable Bitmap Read
PGM Portable Graymap Read
PPM Portable Pixmap Read/write
TIFF Tagged Image File Format Read/write
XBM X11 Bitmap Read/write
XPM X11 Pixmap Read/write

(To configure Qt with GIF support, pass -qt-gif to the configure script or check the appropriate option in the graphical installer.)

[править] Image Information

QImage provides a collection of functions that can be used to obtain a variety of information about the image:


Available Functions
Geometry The size(), width(), height(), dotsPerMeterX(), and dotsPerMeterY() functions provide information about the image size and aspect ratio.

The rect() function returns the image's enclosing rectangle. The valid() function tells if a given pair of coordinates is within this rectangle. The offset() function returns the number of pixels by which the image is intended to be offset by when positioned relative to other images, which also can be manipulated using the setOffset() function.

Colors The color of a pixel can be retrieved by passing its coordinates to the pixel() function. The pixel() function returns the color as a QRgb value indepedent of the image's format.

In case of monochrome and 8-bit images, the numColors() and colorTable() functions provide information about the color components used to store the image data: The colorTable() function returns the image's entire color table. To obtain a single entry, use the pixelIndex() function to retrieve the pixel index for a given pair of coordinates, then use the color() function to retrieve the color. Note that if you create an 8-bit image manually, you have to set a valid color table on the image as well.

The hasAlphaChannel() function tells if the image's format respects the alpha channel, or not. The allGray() and isGrayscale() functions tell whether an image's colors are all shades of gray.

See also the Pixel Manipulation and Image Transformations sections.

Text The text() function returns the image text associated with the given text key. An image's text keys can be retrieved using the textKeys() function. Use the setText() function to alter an image's text.
Low-level information The depth() function returns the depth of the image. The supported depths are 1 (monochrome), 8 and 32 (for more information see the Image Formats section).

The format(), bytesPerLine(), and numBytes() functions provide low-level information about the data stored in the image.

The cacheKey() function returns a number that uniquely identifies the contents of this QImage object.

[править] Pixel Manipulation

The functions used to manipulate an image's pixels depend on the image format. The reason is that monochrome and 8-bit images are index-based and use a color lookup table, while 32-bit images store ARGB values directly. For more information on image formats, see the Image Formats section.

In case of a 32-bit image, the setPixel() function can be used to alter the color of the pixel at the given coordinates to any other color specified as an ARGB quadruplet. To make a suitable QRgb value, use the qRgb() (adding a default alpha component to the given RGB values, i.e. creating an opaque color) or qRgba() function. For example:


Файл:Qimage-32bit scaled.png
 QImage image(3, 3, QImage::Format_RGB32);
 QRgb value;
 
 value = qRgb(189, 149, 39); // 0xffbd9527
 image.setPixel(1, 1, value);
 
 value = qRgb(122, 163, 39); // 0xff7aa327
 image.setPixel(0, 1, value);
 image.setPixel(1, 0, value);
 
 value = qRgb(237, 187, 51); // 0xffedba31
 image.setPixel(2, 1, value);
32-bit

In case of a 8-bit and monchrome images , the pixel value is only an index from the image's color table. So the setPixel() function can only be used to alter the color of the pixel at the given coordinates to a predefined color from the image's color table, i.e. it can only change the pixel's index value. To alter or add a color to an image's color table, use the setColor() function.

An entry in the color table is an ARGB quadruplet encoded as an QRgb value. Use the qRgb() and qRgba() functions to make a suitable QRgb value for use with the setColor() function. For example:


Файл:Qimage-8bit scaled.png
 QImage image(3, 3, QImage::Format_Indexed8);
 QRgb value;
 
 value = qRgb(122, 163, 39); // 0xff7aa327
 image.setColor(0, value);
 
 value = qRgb(237, 187, 51); // 0xffedba31
 image.setColor(1, value);
 
 value = qRgb(189, 149, 39); // 0xffbd9527
 image.setColor(2, value);
 
 image.setPixel(0, 1, 0);
 image.setPixel(1, 0, 0);
 image.setPixel(1, 1, 2);
 image.setPixel(2, 1, 1);
8-bit

QImage also provide the scanLine() function which returns a pointer to the pixel data at the scanline with the given index, and the bits() function which returns a pointer to the first pixel data (this is equivalent to scanLine(0)).

[править] Image Formats

Each pixel stored in a QImage is represented by an integer. The size of the integer varies depending on the format. QImage supports several image formats described by the Format enum. The monochrome (1-bit), 8-bit and 32-bit images are available in all versions of Qt. In addition Qtopia Core also supports 2-bit, 4-bit, and 16-bit images. For more information about the Qtopia specific formats, see the documentation of the Format enum.

Monochrome images are stored using 1-bit indexes into a color table with at most two colors. There are two different types of monochrome images: big endian (MSB first) or little endian (LSB first) bit order.

8-bit images are stored using 8-bit indexes into a color table, i.e. they have a single byte per pixel. The color table is a QVector< QRgb>, and the QRgb typedef is equivalent to an unsigned int containing an ARGB quadruplet on the format 0xAARRGGBB.

32-bit images have no color table; instead, each pixel contains an QRgb value. There are three different types of 32-bit images storing RGB (i.e. 0xffRRGGBB), ARGB and premultiplied ARGB values respectively. In the premultiplied format the red, green, and blue channels are multiplied by the alpha component divided by 255.

An image's format can be retrieved using the format() function. Use the convertToFormat() functions to convert an image into another format. The allGray() and isGrayscale() functions tell whether a color image can safely be converted to a grayscale image.

[править] Image Transformations

QImage supports a number of functions for creating a new image that is a transformed version of the original: The createAlphaMask() function builds and returns a 1-bpp mask from the alpha buffer in this image, and the createHeuristicMask() function creates and returns a 1-bpp heuristic mask for this image. The latter function works by selecting a color from one of the corners, then chipping away pixels of that color starting at all the edges.

The mirrored() function returns a mirror of the image in the desired direction, the scaled() returns a copy of the image scaled to a rectangle of the desired measures, the rgbSwapped() function constructs a BGR image from a RGB image, and the alphaChannel() function constructs an image from this image's alpha channel.

The scaledToWidth() and scaledToHeight() functions return scaled copies of the image.

The transformed() function returns a copy of the image that is transformed with the given transformation matrix and transformation mode: Internally, the transformation matrix is adjusted to compensate for unwanted translation, i.e. transformed() returns the smallest image containing all transformed points of the original image. The static trueMatrix() function returns the actual matrix used for transforming the image.

There are also functions for changing attributes of an image in-place:


Function Description
setAlphaChannel() Sets the alpha channel of the image.
setDotsPerMeterX() Defines the aspect ratio by setting the number of pixels that fit horizontally in a physical meter.
setDotsPerMeterY() Defines the aspect ratio by setting the number of pixels that fit vertically in a physical meter.
fill() Fills the entire image with the given pixel value.
invertPixels() Inverts all pixel values in the image using the given InvertMode value.
setColorTable() Sets the color table used to translate color indexes. Only monochrome and 8-bit formats.
setNumColors() Resizes the color table. Only monochrome and 8-bit formats.

[править] Legal Information

For smooth scaling, the transformed() functions use code based on smooth scaling algorithm by Daniel M. Duley.

Copyright (C) 2004, 2005 Daniel M. Duley

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

See also QImageReader, QImageWriter, QPixmap, QSvgRenderer, Image Composition Example, Image Viewer Example, Scribble Example, and Pixelator Example.


[править] Описание типов членов

[править]
enum QImage::Format

The following image formats are available in all versions of Qt:


Constant Value Description
QImage::Format_Invalid 0 The image is invalid.
QImage::Format_Mono 1 The image is stored using 1-bit per pixel. Bytes are packed with the most significant bit (MSB) first.
QImage::Format_MonoLSB 2 The image is stored using 1-bit per pixel. Bytes are packed with the less significant bit (LSB) first.
QImage::Format_Indexed8 3 The image is stored using 8-bit indexes into a colormap.
QImage::Format_RGB32 4 The image is stored using a 32-bit RGB format (0xffRRGGBB).
QImage::Format_ARGB32 5 The image is stored using a 32-bit ARGB format (0xAARRGGBB).
QImage::Format_ARGB32_Premultiplied 6 The image is stored using a premultiplied 32-bit ARGB format (0xAARRGGBB), i.e. the red, green, and blue channels are multiplied by the alpha component divided by 255. (If RR, GG, or BB has a higher value than the alpha channel, the results are undefined.) Certain operations (such as image composition using alpha blending) are faster using premultiplied ARGB32 than with plain ARGB32.

The following image format is specific to Qtopia Core:


Constant Value Description
QImage::Format_RGB16 7 The image is stored using a 16-bit RGB format (5-6-5).

See also format() and convertToFormat().

[править]
enum QImage::InvertMode

This enum type is used to describe how pixel values should be inverted in the invertPixels() function.


Constant Value Description
QImage::InvertRgb 0 Invert only the RGB values and leave the alpha channel unchanged.
QImage::InvertRgba 1 Invert all channels, including the alpha channel.

See also invertPixels().


[править] Описание функций-членов

[править]
QImage::QImage ()

Constructs a null image.

See also isNull().

[править]
QImage::QImage ( const QSize & size, Format format )

Constructs an image with the given size and format.

[править]
QImage::QImage ( int width, int height, Format format )

Constructs an image with the given width, height and format.

[править]
QImage::QImage ( uchar * data, int width, int height, Format format )

Constructs an image with the given width, height and format, that uses an existing memory buffer, data. The width and height must be specified in pixels, data must be 32-bit aligned, and each scanline of data in the image must also be 32-bit aligned.

The buffer must remain valid throughout the life of the QImage. The image does not delete the buffer at destruction.

If the image is in an indexed color format, set the color table for the image using setColorTable().

[править]
QImage::QImage ( const uchar * data, int width, int height, Format format )

Constructs an image with the given width, height and format, that uses an existing read-only memory buffer, data. The width and height must be specified in pixels, data must be 32-bit aligned, and each scanline of data in the image must also be 32-bit aligned.

The buffer must remain valid throughout the life of the QImage and all copies that have not been modified or otherwise detached from the original buffer. The image does not delete the buffer at destruction.

If the image is in an indexed color format, set the color table for the image using setColorTable().

Unlike the similar QImage constructor that takes a non-const data buffer, this version will never alter the contents of the buffer. For example, calling QImage::bits() will return a deep copy of the image, rather than the buffer passed to the constructor. This allows for the efficiency of constructing a QImage from raw data, without the possibility of the raw data being changed.

[править]
QImage::QImage ( uchar * data, int width, int height, int bytesPerLine, Format format )

Constructs an image with the given width, height and format, that uses an existing memory buffer, data. The width and height must be specified in pixels. bytesPerLine specifies the number of bytes per line (stride).

The buffer must remain valid throughout the life of the QImage. The image does not delete the buffer at destruction.

If the image is in an indexed color format, set the color table for the image using setColorTable().

[править]
QImage::QImage ( const uchar * data, int width, int height, int bytesPerLine, Format format )

Constructs an image with the given width, height and format, that uses an existing memory buffer, data. The width and height must be specified in pixels. bytesPerLine specifies the number of bytes per line (stride).

The buffer must remain valid throughout the life of the QImage. The image does not delete the buffer at destruction.

If the image is in an indexed color format, set the color table for the image using setColorTable().

Unlike the similar QImage constructor that takes a non-const data buffer, this version will never alter the contents of the buffer. For example, calling QImage::bits() will return a deep copy of the image, rather than the buffer passed to the constructor. This allows for the efficiency of constructing a QImage from raw data, without the possibility of the raw data being changed.

[править]
QImage::QImage ( const char * const[] xpm )

Constructs an image from the given xpm image.

Make sure that the image is a valid XPM image. Errors are silently ignored.

Note that it's possible to squeeze the XPM variable a little bit by using an unusual declaration:

 static const char * const start_xpm[] = {
     "16 15 8 1",
     "a c #cec6bd",
 ....

The extra const makes the entire definition read-only, which is slightly more efficient (e.g. when the code is in a shared library) and ROMable when the application is to be stored in ROM.

[править]
QImage::QImage ( const QString & fileName, const char * format = 0 )

Constructs an image and tries to load the image from the file with the given fileName.

The loader attempts to read the image using the specified format. If the format is not specified (which is the default), the loader probes the file for a header to guess the file format.

If the loading of the image failed, this object is a null image.

The file name can either refer to an actual file on disk or to one of the application's embedded resources. See the Resource System overview for details on how to embed images and other resource files in the application's executable.

See also isNull() and Reading and Writing Image Files.

[править]
QImage::QImage ( const char * fileName, const char * format = 0 )

Constructs an image and tries to load the image from the file with the given fileName.

The loader attempts to read the image using the specified format. If the format is not specified (which is the default), the loader probes the file for a header to guess the file format.

If the loading of the image failed, this object is a null image.

The file name can either refer to an actual file on disk or to one of the application's embedded resources. See the Resource System overview for details on how to embed images and other resource files in the application's executable.

You can disable this constructor by defining QT_NO_CAST_FROM_ASCII when you compile your applications. This can be useful, for example, if you want to ensure that all user-visible strings go through QObject::tr().

See also QString::fromAscii(), isNull(), and Reading and Writing Image Files.

[править]
QImage::QImage ( const QImage & image )

Constructs a shallow copy of the given image.

For more information about shallow copies, see the Implicit Data Sharing documentation.

See also copy().

[править]
QImage::~QImage ()

Destroys the image and cleans up.

[править]
bool QImage::allGray () const

Returns true if all the colors in the image are shades of gray (i.e. their red, green and blue components are equal); otherwise false.

Note that this function is slow for images without color table.

See also isGrayscale().

[править]
QImage QImage::alphaChannel () const

Returns the alpha channel of the image as a new grayscale QImage in which each pixel's red, green, and blue values are given the alpha value of the original image. The color depth of the returned image is 8-bit.

You can see an example of use of this function in QPixmap's alphaChannel(), which works in the same way as this function on QPixmaps.

See also setAlphaChannel() and Pixmap sa setAlphaChannel(), hasAlphaChannel(), {QImage#Image Transformations}{Image Transformations}.

[править]
uchar * QImage::bits ()

Returns a pointer to the first pixel data. This is equivalent to scanLine(0).

Note that QImage uses implicit data sharing. This function performs a deep copy of the shared pixel data, thus ensuring that this QImage is the only one using the current return value.

See also scanLine() and numBytes().

[править]
const uchar * QImage::bits () const

This is an overloaded member function, provided for convenience.

Note that QImage uses implicit data sharing, but this function does not perform a deep copy of the shared pixel data, because the returned data is const.

[править]
int QImage::bytesPerLine () const

Returns the number of bytes per image scanline.

This is equivalent to numBytes()/ height().

See also scanLine().

[править]
qint64 QImage::cacheKey () const

Returns a number that identifies the contents of this QImage object. Distinct QImage objects can only have the same key if they refer to the same contents.

The key will change when the image is altered.

[править]
QRgb QImage::color ( int i ) const

Returns the color in the color table at index i. The first color is at index 0.

The colors in an image's color table are specified as ARGB quadruplets ( QRgb). Use the qAlpha(), qRed(), qGreen(), and qBlue() functions to get the color value components.

See also setColor(), pixelIndex(), and Pixel Manipulation.

[править]
QVector< QRgb> QImage::colorTable () const

Returns a list of the colors contained in the image's color table, or an empty list if the image does not have a color table

See also setColorTable(), numColors(), and color().

[править]
QImage QImage::convertToFormat ( Format format, Qt::ImageConversionFlags flags = Qt::AutoColor ) const

Returns a copy of the image in the given format.

The specified image conversion flags control how the image data is handled during the conversion process.

See also Image Format.

[править]
QImage QImage::convertToFormat ( Format format, const QVector< QRgb> & colorTable, Qt::ImageConversionFlags flags = Qt::AutoColor ) const

This is an overloaded member function, provided for convenience.

Returns a copy of the image converted to the given format, using the specified colorTable.

Conversion from 32 bit to 8 bit indexed is a slow operation and will use a straightforward nearest color approach, with no dithering.

[править]
QImage QImage::copy ( const QRect & rectangle = QRect() ) const

Returns a sub-area of the image as a new image.

The returned image is copied from the position (rectangle.x(), rectangle.y()) in this image, and will always have the size of the given rectangle.

In areas beyond this image, pixels are set to 0. For 32-bit RGB images, this means black; for 32-bit ARGB images, this means transparent black; for 8-bit images, this means the color with index 0 in the color table which can be anything; for 1-bit images, this means Qt::color0.

If the given rectangle is a null rectangle the entire image is copied.

See also QImage().

[править]
QImage QImage::copy ( int x, int y, int width, int height ) const

This is an overloaded member function, provided for convenience.

The returned image is copied from the position (x, y) in this image, and will always have the given width and height. In areas beyond this image, pixels are set to 0.

[править]
QImage QImage::createAlphaMask ( Qt::ImageConversionFlags flags = Qt::AutoColor ) const

Builds and returns a 1-bpp mask from the alpha buffer in this image. Returns a null image if the image's format is QImage::Format_RGB32.

The flags argument is a bitwise-OR of the Qt::ImageConversionFlags, and controls the conversion process. Passing 0 for flags sets all the default options.

The returned image has little-endian bit order (i.e. the image's format is QImage::Format_MonoLSB), which you can convert to big-endian ( QImage::Format_Mono) using the convertToFormat() function.

See also createHeuristicMask() and Image Transformations.

[править]
QImage QImage::createHeuristicMask ( bool clipTight = true ) const

Creates and returns a 1-bpp heuristic mask for this image.

The function works by selecting a color from one of the corners, then chipping away pixels of that color starting at all the edges. The four corners vote for which color is to be masked away. In case of a draw (this generally means that this function is not applicable to the image), the result is arbitrary.

The returned image has little-endian bit order (i.e. the image's format is QImage::Format_MonoLSB), which you can convert to big-endian ( QImage::Format_Mono) using the convertToFormat() function.

If clipTight is true (the default) the mask is just large enough to cover the pixels; otherwise, the mask is larger than the data pixels.

Note that this function disregards the alpha buffer.

See also createAlphaMask() and Image Transformations.

[править]
QImage QImage::createMaskFromColor ( QRgb color, Qt::MaskMode mode = Qt::MaskInColor ) const

Creates and returns a mask for this image based on the given color value. If the mode is MaskInColor (the default value), all pixels matching color will be opaque pixels in the mask. If mode is MaskOutColor, all pixels matching the given color will be transparent.

See also createAlphaMask() and createHeuristicMask().

[править]
int QImage::depth () const

Returns the depth of the image.

The image depth is the number of bits used to encode a single pixel, also called bits per pixel (bpp) or bit planes of an image.

The supported depths are 1, 8 and 32.

See also convertToFormat(), Image Formats, and Image Information.

[править]
int QImage::dotsPerMeterX () const

Returns the number of pixels that fit horizontally in a physical meter. Together with dotsPerMeterY(), this number defines the intended scale and aspect ratio of the image.

See also setDotsPerMeterX() and Image Information.

[править]
int QImage::dotsPerMeterY () const

Returns the number of pixels that fit vertically in a physical meter. Together with dotsPerMeterX(), this number defines the intended scale and aspect ratio of the image.

See also setDotsPerMeterY() and Image Information.

[править]
void QImage::fill ( uint pixelValue )

Fills the entire image with the given pixelValue.

If the depth of this image is 1, only the lowest bit is used. If you say fill(0), fill(2), etc., the image is filled with 0s. If you say fill(1), fill(3), etc., the image is filled with 1s. If the depth is 8, the lowest 8 bits are used and if the depth is 16 the lowest 16 bits are used.

Note: QImage::pixel() returns the color of the pixel at the given coordinates while QColor::pixel() returns the pixel value of the underlying window system (essentially an index value), so normally you will want to use QImage::pixel() to use a color from an existing image or QColor::rgb() to use a specific color.

See also depth() and Image Transformations.

[править]
Format QImage::format () const

Returns the format of the image.

See also Image Formats.

[править]
QImage QImage::fromData ( const uchar * data, int size, const char * format = 0 ) [static]

Constructs a QImage from the first size bytes of the given binary data. the loader attempts to read the image using the specified format. If the format is not specified (which is the default), the loader probes the file for a header to guess the file format.

If the loading of the image failed, this object is a null image.

See also load(), save(), and Reading and Writing Image Files.

[править]
QImage QImage::fromData ( const QByteArray & data, const char * format = 0 ) [static]

This is an overloaded member function, provided for convenience.

Loads an image from the given QByteArray data.

[править]
bool QImage::hasAlphaChannel () const

Returns true if the image has a format that respects the alpha channel, otherwise returns false.

See also alphaChannel() and Image Information.

[править]
int QImage::height () const

Returns the height of the image.

See also Image Information.

[править]
void QImage::invertPixels ( InvertMode mode = InvertRgb )

Inverts all pixel values in the image.

The given invert mode only have a meaning when the image's depth is 32. The default mode is InvertRgb, which leaves the alpha channel unchanged. If the mode is InvertRgba, the alpha bits are also inverted.

Inverting an 8-bit image means to replace all pixels using color index i with a pixel using color index 255 minus i. The same is the case for a 1-bit image. Note that the color table is not changed.

See also Image Transformations.

[править]
bool QImage::isGrayscale () const

For 32-bit images, this function is equivalent to allGray().

For 8-bpp images, this function returns true if color(i) is QRgb(i, i, i) for all indexes of the color table; otherwise returns false.

See also allGray() and Image Formats.

[править]
bool QImage::isNull () const

Returns true if it is a null image, otherwise returns false.

A null image has all parameters set to zero and no allocated data.

[править]
bool QImage::load ( const QString & fileName, const char * format = 0 )

Loads an image from the file with the given fileName. Returns true if the image was successfully loaded; otherwise returns false.

The loader attempts to read the image using the specified format. If the format is not specified (which is the default), the loader probes the file for a header to guess the file format.

The file name can either refer to an actual file on disk or to one of the application's embedded resources. See the Resource System overview for details on how to embed images and other resource files in the application's executable.

See also Reading and Writing Image Files.

[править]
bool QImage::load ( QIODevice * device, const char * format )

This is an overloaded member function, provided for convenience.

This function reads a QImage from the given device. This can, for example, be used to load an image directly into a QByteArray.

[править]
bool QImage::loadFromData ( const uchar * data, int len, const char * format = 0 )

Loads an image from the first len bytes of the given binary data. Returns true if the image was successfully loaded; otherwise returns false.

The loader attempts to read the image using the specified format. If the format is not specified (which is the default), the loader probes the file for a header to guess the file format.

See also Reading and Writing Image Files.

[править]
bool QImage::loadFromData ( const QByteArray & data, const char * format = 0 )

This is an overloaded member function, provided for convenience.

Loads an image from the given QByteArray data.

[править]
QImage QImage::mirrored ( bool horizontal = false, bool vertical = true ) const

Returns a mirror of the image, mirrored in the horizontal and/or the vertical direction depending on whether horizontal and vertical are set to true or false.

Note that the original image is not changed.

See also Image Transformations.

[править]
int QImage::numBytes () const

Returns the number of bytes occupied by the image data.

See also bytesPerLine(), bits(), and Image Information.

[править]
int QImage::numColors () const

Returns the size of the color table for the image.

Notice that numColors() returns 0 for 32-bpp images because these images do not use color tables, but instead encode pixel values as ARGB quadruplets.

See also setNumColors() and Image Information.

[править]
QPoint QImage::offset () const

Returns the number of pixels by which the image is intended to be offset by when positioning relative to other images.

See also setOffset() and Image Information.

[править]
QRgb QImage::pixel ( const QPoint & position ) const

Returns the color of the pixel at the given position.

If the position is not valid, the results are undefined.

See also setPixel(), valid(), and Pixel Manipulation.

[править]
QRgb QImage::pixel ( int x, int y ) const

This is an overloaded member function, provided for convenience.

Returns the color of the pixel at coordinates (x, y).

[править]
int QImage::pixelIndex ( const QPoint & position ) const

Returns the pixel index at the given position.

If position is not valid, or if the image is not a paletted image ( depth() > 8), the results are undefined.

See also valid(), depth(), and Pixel Manipulation.

[править]
int QImage::pixelIndex ( int x, int y ) const

This is an overloaded member function, provided for convenience.

Returns the pixel index at (x, y).

[править]
QRect QImage::rect () const

Returns the enclosing rectangle (0, 0, width(), height()) of the image.

See also Image Information.

[править]
QImage QImage::rgbSwapped () const

Returns a QImage in which the values of the red and blue components of all pixels have been swapped, effectively converting an RGB image to an BGR image.

The original QImage is not changed.

See also Image Transformations.

[править]
bool QImage::save ( const QString & fileName, const char * format = 0, int quality = -1 ) const

Saves the image to the file with the given fileName, using the given image file format and quality factor. If format is 0, QImage will attempt to guess the format by looking at fileName's suffix.

The quality factor must be in the range 0 to 100 or -1. Specify 0 to obtain small compressed files, 100 for large uncompressed files, and -1 (the default) to use the default settings.

Returns true if the image was successfully saved; otherwise returns false.

See also Reading and Writing Image Files.

[править]
bool QImage::save ( QIODevice * device, const char * format = 0, int quality = -1 ) const

This is an overloaded member function, provided for convenience.

This function writes a QImage to the given device.

This can, for example, be used to save an image directly into a QByteArray:

         QImage image;
         QByteArray ba;
         QBuffer buffer(&amp;ba);
         buffer.open(QIODevice::WriteOnly);
         image.save(&amp;buffer, "PNG"); // writes image into ba in PNG format

[править]
QImage QImage::scaled ( const QSize & size, Qt::AspectRatioMode aspectRatioMode = Qt::IgnoreAspectRatio, Qt::TransformationMode transformMode = Qt::FastTransformation ) const

Returns a copy of the image scaled to a rectangle defined by the given size according to the given aspectRatioMode and transformMode.

Файл:Qimage-scaling.png

  • If aspectRatioMode is Qt::IgnoreAspectRatio, the image is scaled to size.
  • If aspectRatioMode is Qt::KeepAspectRatio, the image is scaled to a rectangle as large as possible inside size, preserving the aspect ratio.
  • If aspectRatioMode is Qt::KeepAspectRatioByExpanding, the image is scaled to a rectangle as small as possible outside size, preserving the aspect ratio.

If the given size is empty, this function returns a null image.

See also isNull() and Image Transformations.

[править]
QImage QImage::scaled ( int width, int height, Qt::AspectRatioMode aspectRatioMode = Qt::IgnoreAspectRatio, Qt::TransformationMode transformMode = Qt::FastTransformation ) const

This is an overloaded member function, provided for convenience.

Returns a copy of the image scaled to a rectangle with the given width and height according to the given aspectRatioMode and transformMode.

If either the width or the height is zero or negative, this function returns a null image.

[править]
QImage QImage::scaledToHeight ( int height, Qt::TransformationMode mode = Qt::FastTransformation ) const

Returns a scaled copy of the image. The returned image is scaled to the given height using the specified transformation mode.

This function automatically calculates the width of the image so that the ratio of the image is preserved.

If the given height is 0 or negative, a null image is returned.

See also Image Transformations.

[править]
QImage QImage::scaledToWidth ( int width, Qt::TransformationMode mode = Qt::FastTransformation ) const

Returns a scaled copy of the image. The returned image is scaled to the given width using the specified transformation mode.

This function automatically calculates the height of the image so that its aspect ratio is preserved.

If the given width is 0 or negative, a null image is returned.

See also Image Transformations.

[править]
uchar * QImage::scanLine ( int i )

Returns a pointer to the pixel data at the scanline with index i. The first scanline is at index 0.

The scanline data is aligned on a 32-bit boundary.

Warning: If you are accessing 32-bpp image data, cast the returned pointer to QRgb* ( QRgb has a 32-bit size) and use it to read/write the pixel value. You cannot use the uchar* pointer directly, because the pixel format depends on the byte order on the underlying platform. Use qRed(), qGreen(), qBlue(), and qAlpha() to access the pixels.

See also bytesPerLine(), bits(), and Pixel Manipulation.

[править]
const uchar * QImage::scanLine ( int i ) const

This is an overloaded member function, provided for convenience.

[править]
void QImage::setAlphaChannel ( const QImage & alphaChannel )

Sets the alpha channel of this image to the given alphaChannel.

If alphaChannel is an 8 bit grayscale image, the intensity values are written into this buffer directly. Otherwise, alphaChannel is converted to 32 bit and the intensity of the RGB pixel values is used.

Note that the image will be converted to the Format_ARGB32_Premultiplied format if the function succeeds.

See also alphaChannel(), Image Transformations, and Image Formats.

[править]
void QImage::setColor ( int index, QRgb colorValue )

Sets the color at the given index in the color table, to the given to colorValue.

The color value is an ARGB quadruplet.

See also color(), setColorTable(), and Pixel Manipulation.

[править]
void QImage::setColorTable ( const QVector< QRgb> colors )

Sets the color table used to translate color indexes to QRgb values, to the specified colors.

See also colorTable(), setColor(), and Image Transformations.

[править]
void QImage::setDotsPerMeterX ( int x )

Sets the number of pixels that fit horizontally in a physical meter, to x.

Together with dotsPerMeterY(), this number defines the intended scale and aspect ratio of the image.

See also dotsPerMeterX() and Image Information.

[править]
void QImage::setDotsPerMeterY ( int y )

Sets the number of pixels that fit vertically in a physical meter, to y.

Together with dotsPerMeterX(), this number defines the intended scale and aspect ratio of the image.

See also dotsPerMeterY() and Image Information.

[править]
void QImage::setNumColors ( int numColors )

Resizes the color table to contain numColors entries.

If the color table is expanded, all the extra colors will be set to transparent (i.e qRgba(0, 0, 0, 0)).

See also numColors(), colorTable(), and Image Transformations.

[править]
void QImage::setOffset ( const QPoint & offset )

Sets the the number of pixels by which the image is intended to be offset by when positioning relative to other images, to offset.

See also offset() and Image Information.

[править]
void QImage::setPixel ( const QPoint & position, uint index_or_rgb )

Sets the pixel index or color at the given position to index_or_rgb.

If the image's format is either monochrome or 8-bit, the given index_or_rgb value must be an index in the image's color table, otherwise the parameter must be a QRgb value.

If position is not a valid coordinate pair in the image, or if index_or_rgb >= numColors() in the case of monochrome and 8-bit images, the result is undefined.

See also pixel() and Pixel Manipulation.

[править]
void QImage::setPixel ( int x, int y, uint index_or_rgb )

This is an overloaded member function, provided for convenience.

Sets the pixel index or color at (x, y) to index_or_rgb.

[править]
void QImage::setText ( const QString & key, const QString & text )

Sets the image text to the given text and associate it with the given key.

If you just want to store a single text block (i.e., a "comment" or just a description), you can either pass an empty key, or use a generic key like "Description".

The image text is embedded into the image data when you call save() or QImageWriter::write().

Not all image formats support embedded text. You can find out if a specific image or format supports embedding text by using QImageWriter::supportsOption(). We give an example:

         QImageWriter writer;
         writer.setFormat("png");
         if (writer.supportsOption(QImageIOHandler::Description))
             qDebug() << "Png supports embedded text";

You can use QImageWriter::supportedImageFormats() to find out which image formats are available to you.

See also text() and textKeys().

[править]
QSize QImage::size () const

Returns the size of the image, i.e. its width() and height().

See also Image Information.

[править]
QString QImage::text ( const QString & key = QString() ) const

Returns the image text associated with the given key. If the specified key is an empty string, the whole image text is returned, with each key-text pair separated by a newline.

See also setText() and textKeys().

[править]
QStringList QImage::textKeys () const

Returns the text keys for this image.

You can use these keys with text() to list the image text for a certain key.

See also text().

[править]
QImage QImage::transformed ( const QMatrix & matrix, Qt::TransformationMode mode = Qt::FastTransformation ) const

Returns a copy of the image that is transformed using the given transformation matrix and transformation mode.

The transformation matrix is internally adjusted to compensate for unwanted translation; i.e. the image produced is the smallest image that contains all the transformed points of the original image. Use the trueMatrix() function to retrieve the actual matrix used for transforming an image.

See also trueMatrix() and Image Transformations.

[править]
QImage QImage::transformed ( const QTransform & matrix, Qt::TransformationMode mode = Qt::FastTransformation ) const

This is an overloaded member function, provided for convenience.

Returns a copy of the image that is transformed using the given transformation matrix and transformation mode.

The transformation matrix is internally adjusted to compensate for unwanted translation; i.e. the image produced is the smallest image that contains all the transformed points of the original image. Use the trueMatrix() function to retrieve the actual matrix used for transforming an image.

Unlike the other overload, this function can be used to perform perspective transformations on images.

See also trueMatrix() and Image Transformations.

[править]
QMatrix QImage::trueMatrix ( const QMatrix & matrix, int width, int height ) [static]

Returns the actual matrix used for transforming an image with the given width, height and matrix.

When transforming an image using the transformed() function, the transformation matrix is internally adjusted to compensate for unwanted translation, i.e. transformed() returns the smallest image containing all transformed points of the original image. This function returns the modified matrix, which maps points correctly from the original image into the new image.

See also transformed() and Image Transformations.

[править]
QTransform QImage::trueMatrix ( const QTransform & matrix, int width, int height ) [static]

This is an overloaded member function, provided for convenience.

Returns the actual matrix used for transforming an image with the given width, height and matrix.

When transforming an image using the transformed() function, the transformation matrix is internally adjusted to compensate for unwanted translation, i.e. transformed() returns the smallest image containing all transformed points of the original image. This function returns the modified matrix, which maps points correctly from the original image into the new image.

Unlike the other overload, this function creates transformation matrices that can be used to perform perspective transformations on images.

See also transformed() and Image Transformations.

[править]
bool QImage::valid ( const QPoint & pos ) const

Returns true if pos is a valid coordinate pair within the image; otherwise returns false.

See also rect() and QRect::contains().

[править]
bool QImage::valid ( int x, int y ) const

This is an overloaded member function, provided for convenience.

Returns true if QPoint(x, y) is a valid coordinate pair within the image; otherwise returns false.

[править]
int QImage::width () const

Returns the width of the image.

See also Image Information.

[править]
QImage::operator QVariant () const

Returns the image as a QVariant.

[править]
bool QImage::operator!= ( const QImage & image ) const

Returns true if this image and the given image have different contents; otherwise returns false.

The comparison can be slow, unless there is some obvious difference, such as different widths, in which case the function will return quickly.

See also operator=().

[править]
QImage & QImage::operator= ( const QImage & image )

Assigns a shallow copy of the given image to this image and returns a reference to this image.

For more information about shallow copies, see the Implicit Data Sharing documentation.

See also copy() and QImage().

[править]
bool QImage::operator== ( const QImage & image ) const

Returns true if this image and the given image have the same contents; otherwise returns false.

The comparison can be slow, unless there is some obvious difference (e.g. different size or format), in which case the function will return quickly.

See also operator=().


[править] Связанные не-члены

[править]
QDataStream & operator<< ( QDataStream & stream, const QImage & image )

This is an overloaded member function, provided for convenience.

Writes the given image to the given stream as a PNG image, or as a BMP image if the stream's version is 1. Note that writing the stream to a file will not produce a valid image file.

See also QImage::save() and Format of the QDataStream Operators.

[править]
QDataStream & operator>> ( QDataStream & stream, QImage & image )

This is an overloaded member function, provided for convenience.

Reads an image from the given stream and stores it in the given image.

See also QImage::load() and Format of the QDataStream Operators.


Copyright © 2007 Trolltech Trademarks
Qt 4.3.2